• Fulfill Your Imagination with One Pass: xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks

40watt

• Step one: Goto SDPSI (as an example) and click on a L timing pulley.
• Click on STC parts link and “download 3D models”.
• On new tab, select file formal “step, .stp”
• Let the internal website software convert the file for you (takes 30 seconds) and click download
• Open the downloaded zip file containing a stp file, such as “a_6a_4-10df05016.stp”
• Open freecad and open the step file
• On the lefthand side, click the part name under “unnamed”
• Under the help menu there is a submenu selection tool. Select “Mesh Design” and the top menu will change to include “Meshes.”
• Select mesh > create mesh from geometry, and leave the value at 0.1 on the next screen. Hit enter.
• Now on the left hand side, click “mesh”
• On the meshes menu, select export mesh. Select “Binary STL.”
• You can now process this with Slicer, Tinkercad, Sketchup (with import library included on this site).
• Print free parts!!

• Open PrusaSlicer (version 2.3 or later).
• Go to the “Print Settings” tab, and click “Infill”.
• Select either “Advanced” or “Expert” mode on the top right side of the screen. You should then see a section labeled “Ironing”.

Temperature Monitoring
Probes

Probe Type Thermometer   

Thermal Fabric
54 inches; however, 48-inch-wide fabric is found both here and in Great Britain, and 40- and 42-inch widths are standard for many imported fabrics, like Indian silks.Feb 13, 2011

PIR Controler\
heater Element
Bulbs