PETG
Prints plus metal
Octoprint
Filaments
Danish Christmas  Hearts
Rub_n_glow
Bicycle Accesories
Audio Accessories
Mailbox
Instrument Panels
Printer Farms
Try geometries in sketchup to trick slicer.
Metals
Markforged
BASF
Ceramics
Fit
Smallest screw. 3/16 5mm .20 inches

Design Rules           
Tolerances
Desired FitClearance Gap (in)Clearance Gap (mm)
Press FitLine to LineLine to Line
Tight Fit0.0050.127
Normal Fit0.0100.254
Loose Fit0.0200.508
2. Minimum Wall Thickness (0.8)  & Feature Size. The minimum wall thickness is directly related to your nozzle diameter. On GRR machines, the default nozzle size is 0.040 mm nozzle which corresponds to the minimum wall thickness. A “bad wall” is one that only lays down one bead of plastic. The “minimum stable wall” will lay down two beads and a “better wall” will put down more than two beads.  Bearing this in mind, the minimum feature size is also driven by your nozzle diameter. It must be at least two times the nozzle size.

So again, on GRR machines, with a default nozzle size of 0.40 mm, the desired minimum feature size is going to be 0.8 mm (0.031”).