Conductive Filalment Circadea.

Conductive Filament

PLA $100 per kilo.
PLA .006 Ω per cm. $196 per 100g.

Products:
Led Lighting
Game Pads
Circuits

Proto-Pasta Conductive PLA is easy to print and can be used on any 3D printer that can handle PLA filament. This conductive filament is ideal for low voltage circuitry and can even power a low current Arduino. So how does this filament compare to regular PLA? Great question - this conductive PLA filament will print objects that are more flexible than normal PLA but have less layer adhesion. It can be characterized as semi-flexible and should be kept at temperatures below 50C. If you decide to use this material in a dual extruder, we recommend printing it with regular PLA since they stick well to one another.

You might be asking yourself, just how conductive is this filament? Below please find the various measurements of conductivity as provided by Proto-Pasta.

Volume resistivity of molded resin (not 3D Printed): 15 ohm-cm
Volume resistivity of 3D printed parts perpendicular to layers: 30 ohm-cm
Volume resistivity of 3D printed parts through layers (along Z axis): 115 ohm-cm
Resistance of a 10cm length of 1.75mm filament: 1.8Kohm
Resistance of a 10cm length of 2.85mm filament: 600ohm

Density:

1.15 g/cm3 (1500 kg/m3)

Parameters:

Bed Temp (if available, is not required): 50° C

Hot End Temp: 215 – 230° C (we advise printing at the hotter end of the range)