| Type | Tolerance | -3D Printing Materials | Description |
|---|---|---|---|
| Carbon | ±0.2mm | Carbon Fiber ABS | CF-ABS is made using ABS and 15% high-modulus carbon fiber.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalStrong±0.3% (lower limit of ±0.2mm)StandardCarbon Fiber FDM Nylon show details |
| Carbon | ±0.4mm | Carbon Fiber FDM Nylon | Carbon-fiber reinforced nylon is a strong and heat-resistant material, commonly used to print strong and functional parts.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalImpact resistantChemical resistant±0.3% (lower limit of ±0.4mm)StandardCarbon Fiber PEEK show details |
| Carbon | ±0.2mm | Carbon Fiber PEEK | Carbon-reinforced PEEK is stronger and stiffer than normal PEEK.FDMInfills: 20%, 40%, 60%, 80%, 100%Chemical resistantFunctionalHeat resistantStrong±0.3% (lower limit of ±0.2mm)StandardCarbon Fiber PETG show details |
| Carbon | ±0.4mm | Carbon Fiber PETG | Carbon-reinforced PETG is stronger and stiffer than normal PETG.FDMInfills: 20%, 40%, 60%, 80%, 100%Chemical resistantStrongDurableFunctional±0.4% (lower limit of ±0.4mm)StandardCarbon Fiber PLA show details |
| Carbon | ±0.2mm | Carbon Fiber PLA | Carbon-reinforced PLA is stronger and stiffer than normal PLA.FDMInfills: 20%, 40%, 60%, 80%, 100%Functional±0.3% (lower limit of ±0.2mm)StandardCarbon Fiber Polycarbonate show details |
| Carbon | ±0.3mm | Carbon Fiber Polycarbonate | The addition of the carbon fibers to PC improves its strength, toughness, and temperature resistance.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalStrongUV resistantChemical resistant±0.3% (lower limit of ±0.3mm)StandardCastable Resin show details |
| Carbon | ±0.2mm | GreenTec Pro Carbon | GreenTEC Pro Carbon is a biopolymer made from renewable resources combined with 10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantUV resistantFunctionalStrongImpact resistant±0.2% (lower limit of ±0.2mm)Standard matteHIPS show details |
| Carbon | ±0.3mm | SLS Nylon PA11 Carbon Fiber | Carbon-filled PA-11 Nylon is stiffer than regular nylon and is best used for applications where a high strength-to-weight ratio is needed.SLSImpact resistantChemical resistantStrongFunctional±0.3% (lower limit of ±0.3mm)StandardSLS Nylon PA11-ESD show details |
| Metal | ±0.5mm | 17-4 PH Stainless Steel | 420/BR steel is a great material for low-cost metal parts of all sizes.Binder Jetting1Visual±5% (lower limit of ±0.5mm)RawPlated RawPolishedPlated PolishedABS show details17-4 PH SS is a martensite precipitation-hardened stainless steel with high strength and very good resistance to corrosion.SLMLMMDMPImpact resistantStrongFunctional±0.2% (lower limit of ±0.2mm)Sandblasted Matte316L Steel show details |
| Metal | ±0.2mm | 316L Steel | This stainless steel is used for highly detailed, strong, and functional parts.DMLSSLMLMMChemical resistantStrongHeat resistantFunctional±0.3% (lower limit of ±0.2mm)Sandblasted MattePolished glossySatin glossy420/BR Steel show details |
| Metal | ±0.5mm | 420/BR Steel | 420/BR steel is a great material for low-cost metal parts of all sizes.Binder Jetting1Visual±5% (lower limit of ±0.5mm)RawPlated RawPolishedPlated PolishedABS show details |
| Metal | ±0.2mm | Aluminum | This strong and lightweight material features good thermal properties and is widely used for functional metal parts.DMLSSLMStrongHeat resistantFunctional±0.2% (lower limit of ±0.2mm)Raw MatteDeburredSandblastedGlassblastedBASF® Glass-Filled Polypropylene show details |
| Metal | ±0.35mm | Brass | Brass is a versatile material that is great for jewelry prototypes and final parts.Lost Wax CastingVisualHigh detail±5% (lower limit of ±0.35mm)RawRaw, PU coatedPolishedBronze show details |
| Metal | ±0.3mm | Bronze | This classic precious metal is great for antique or modern jewelry and functional parts.DMLSLost Wax CastingVisualFunctional±5% (lower limit of ±0.3mm)RawRaw, PU coatedPolishedRaw, SinteredCNC Metals show details |
| Metal | CNC mac | CNC Metals | CNC machining is available on-demand for a wide range of metals for rapid prototyping and for the production of industrial grade parts.CNCFunctionalStrongVisualSmoothNot availableCNC Plastic show details |
| Metal | ±0.2mm | Copper | Copper is a precious metal with high electrical and thermal conductivity.SLMLost Wax CastingADAMVisualHeat resistant±5% (lower limit of ±0.2mm)Polished UncoatedSinteredADAMDurable Resin show details |
| Metal | ±0.35mm | Gold | Gold is a precious metal commonly used for jewelry pieces and unique art designs.Lost Wax CastingVisualHigh detailSmooth±5% (lower limit of ±0.35mm)14k gold14k Rose Gold14k White Gold18k Gold18k Rose Gold#ERROR!GreenTec Pro show details |
| Metal | ±0.1mm | Maraging Steel | Featuring high strength and hardness, M300 maraging steel is best used for tooling applications.DMLSSLMStrongChemical resistantFunctionalImpact resistant±0.2% (lower limit of ±0.1mm)Sandblasted MatteMarkforged® H13 Tool Steel show details |
| Metal | ±0.2mm | Metal-Filled PLA | Metall-filled PLA is the fusion of standard PLA with metal powder used to provide a metal-textured feeling. Metal-filled PLA is popular with items that do not have functional capabilities, rather an aesthetic appearance.FDMInfills: 20%, 40%, 60%, 80%, 100%Visual±0.3% (lower limit of ±0.2mm)40% Bronze-filled PLA80% Bronze-filled PLA80% Copper-filled PLA40% Iron-filled PLAMulticolor show details |
| Metal | ±0.2mm | Titanium | The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.DMLSSLMLMMStrongHeat resistantChemical resistantFunctional±0.2% (lower limit of ±0.2mm)RawPolishedGlassblastedDeburredTough Resin show details |
| Metal | Sintere | Ultrafuse 17-4 PH Steel | Sintered, FDM printed stainless steel is used for strong and functional parts.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalChemical resistantStrongUV resistantHeat resistantNot availableSintered and SandblastedUltrafuse 316L Steel show details |
| Metal | Sintere | Ultrafuse 316L Steel | Sintered, FDM printed stainless steel is used for strong and functional parts.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalStrongNot availableSintered and SandblastedVisiJet M2S-HT90 show details |
| Plastic | ±0.2mm | ABS | ABS is a strong and versatile material with good impact and chemical resistance. It is great for strong functional parts and prototypes.FDMInfills: 20%, 40%, 60%, 80%, 100%44Impact resistantFunctional±0.3% (lower limit of ±0.2mm)StandardSandedESDPolishedABS Kevlar show details |
| Plastic | ±0.2mm | ABS Kevlar | ABS infused with short Kevlar fibres.FDMInfills: 20%, 40%, 60%, 80%, 100%Strong±0.3% (lower limit of ±0.2mm)StandardASA show details |
| Plastic | ±0.1mm | Accura® 25 | This is a rigid plastic (Shore 80D) used to simulate and replace traditional CNC-machined polypropylene parts.DLPSLAMSLALCD4FunctionalDurableSmoothVisual±0.2% (lower limit of ±0.1mm)Standard SmoothAccura® ClearVue show details |
| Plastic | ±0.1mm | Accura® ClearVue | This high-clarity plastic has excellent humidity and moisture resistance and is ideal for a multitude of applications.DLPSLAMSLALCDHigh detailTransparentDurableFunctionalVisual±0.2% (lower limit of ±0.1mm)RawDyedAccura® Xtreme show details |
| Plastic | ±0.1mm | Accura® Xtreme | This ultra-tough gray plastic offers outstanding durability, accuracy, and aesthetics.SLA4High detailDurableFunctionalVisualStrong±0.2% (lower limit of ±0.1mm)RawAlumide show details |
| Plastic | ±0.3mm | Alumide | Alumide is made from nylon and aluminum powder, and it produces strong, high-temperature-resistant parts.SLSDurableHeat resistantFunctionalVisual±0.3% (lower limit of ±0.3mm)RawPolishedAluminum show details |
| Plastic | ±0.2mm | ASA | ASA is a strong and UV-resistant material that works great in outdoor applications.FDMInfills: 20%, 40%, 60%, 80%, 100%28UV resistantImpact resistant±0.3% (lower limit of ±0.2mm)StandardSandedPolishedAccura® 25 show details |
| Plastic | ±0.2mm | BASF® Glass-Filled Polypropylene | Glass-filled polypropylene is a tough material with high strength that is also resistant to high temperatures. It is suitable for functional verification of product prototypes.SLSChemical resistantFunctionalStrong±0.2% (lower limit of ±0.2mm)RawBioMed Resin show details |
| Plastic | ±0.4mm | BioMed Resin | BioMed resin is certified for short-term bodily contact and is typically used for medical device components.SLADLPcDLMLCDFunctionalBiomedicalHigh detail±0.4% (lower limit of ±0.4mm)StandardBrass show details |
| Plastic | ±0.4mm | Castable Resin | Castable resin is suitable for jewelry and other metal casting.DLPSLAMSLALCDVisualSmooth±0.4% (lower limit of ±0.4mm)StandardCastable Wax show details |
| Plastic | ±0.4mm | Castable Wax | Castable wax is an optimal material for jewelry and other metal casting.MJMMJPVisualSmooth±0.4% (lower limit of ±0.4mm)RawColor-Changing PLA show details |
| Plastic | CNC mac | CNC Plastic | CNC machining is available on-demand for a wide range of plastics for rapid prototyping and for the production of industrial grade parts.CNCSmoothFunctionalVisualNot availableCarbon Fiber ABS show details |
| Plastic | ±0.2mm | Color-Changing PLA | Temperature-based color-changing PLA is ideal for novelty prints.FDMInfills: 20%, 40%, 60%, 80%, 100%Visual±0.3% (lower limit of ±0.2mm)Standard Black-yellowConductive PLA show details |
| Plastic | ±0.2mm | Conductive PLA | Conductive PLA is a version of PLA that is perfect for parts that need to be electrically conductive. It has a volume resistivity(perpendicular to layers) of 30 ohm-cm.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalVisual±0.3% (lower limit of ±0.2mm)StandardCopper show details |
| Plastic | ±0.2mm | Durable Resin | Durable resin has high elongation and impact strength, which makes it ideal for pliable parts like living hinges.SLADLPMSLADurableImpact resistantHigh detailFunctionalVisual±0.2% (lower limit of ±0.2mm)StandardElastic Resin show details |
| Plastic | ±0.4mm | Elastic Resin | This elastic resin with a Shore 50A-65A hardness is perfect for prototyping silicone-like parts.SLADLPMSLALCDFlexibleDurableFunctionalVisual±0.4% (lower limit of ±0.4mm)Standard (Shore 50A-65A)Elastomeric Polyurethane show details |
| Plastic | ±0.2mm | Elastomeric Polyurethane | Elastomeric Polyurethane, or EPU, is a high-performance polyurethane elastomer. It exhibits excellent elastic behavior under cyclic tensile and compressive loads.DLSFunctionalFlexibleDurableImpact resistantSmooth±0.2% (lower limit of ±0.2mm)Standard SmoothEnvisionTEC E-Mould show details |
| Plastic | ±0.2mm | EnvisionTEC E-Mould | E-Mould is a strong, high detail material, which can be used to print molds used for injection molding of various plastics.cDLMDLPSmoothVisualFunctional±0.2% (lower limit of ±0.2mm)StandardFDM Nylon show details |
| Plastic | ±0.2mm | FDM Nylon | Nylon (Polyamide) is great for functional parts and prototypes due to its toughness and resistance to temperature & impact.FDMInfills: 20%, 40%, 60%, 80%, 100%2FunctionalStrongHeat resistantImpact resistant±0.3% (lower limit of ±0.2mm)RawGlass Fiber-ReinforcedFDM Polypropylene show details |
| Plastic | ±0.3mm | FDM Polypropylene | Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts. The FDM technology provides a cheaper alternative to SLS or MJF printed parts.FDMInfills: 20%, 40%, 60%, 80%, 100%Impact resistantDurableFunctional±0.2% (lower limit of ±0.3mm)StandardFDM TPU show details |
| Plastic | ±0.2mm | FDM TPU | FDM-printed TPU is great for producing flexible parts and prototypes, such as casings and shock absorbers.FDMInfills: 20%, 40%, 60%, 80%, 100%27FlexibleImpact resistantDurable±0.4% (lower limit of ±0.2mm)StandardFDM TPU-ESD show details |
| Plastic | ±0.2mm | FDM TPU-ESD | FDM TPU-ESD is an engineering-grade thermoplastic chosen for its balance of flexibility and protection against electrostatic discharge.FDMInfills: 20%, 40%, 60%, 80%, 100%FlexibleImpact resistant±0.4% (lower limit of ±0.2mm)StandardFlame Retardant Polycarbonate show details |
| Plastic | ±0.3mm | Flame Retardant Polycarbonate | Flame Retardant PC has improved strength and thermal properties along with a flame retardant level of UL94: V-2. It is ideal for printing strong, functional parts that must withstand heat.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantFunctionalStrong±0.3% (lower limit of ±0.3mm)StandardFlexible Resin show details |
| Plastic | ±0.3mm | Flexible Resin | Ideal for SLA-printed rubber-like parts featuring a 80A Shore hardness similar to skateboard wheels.SLADLPMSLALCDPolyJet+18FlexibleHigh detailVisualSmoothFunctional±0.3% (lower limit of ±0.3mm)Standard (Shore A80-A90)Glass-Filled Nylon show details |
| Plastic | ±0.3mm | Glass-Filled Nylon | Glass-filled nylon is great for functional parts that require strength and rigidity.SLSMJF4StrongHeat resistantChemical resistantFunctionalVisual±0.3% (lower limit of ±0.3mm)RawPolishedGlass-Filled PEEK show details |
| Plastic | ±0.4mm | Glass-Filled PEEK | Glass fibre reinforced PEEK is one of the highest-performance plastics available in the market. It exhibits exceptional mechanical, thermal, and chemical resistance properties.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantChemical resistantStrongFunctionalUV resistant±0.3% (lower limit of ±0.4mm)StandardGold show details |
| Plastic | ±0.2mm | GreenTec Pro | GreenTec Pro is a high performance biodegradable material made from 100% natural resources. With a high heat resistance(Upto 160°C) and mechanical stress resistance, the material is ideal for demanding applications.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantStrongImpact resistantFunctional±0.2% (lower limit of ±0.2mm)StandardGreenTec Pro Carbon show details |
| Plastic | ±0.15mm | High-Detail Resin | High-detail resin is ideal for printing intricate details, such as small figurines and model cars and trains.DLPSLAMSLALCDPolyJet+126High detailVisualSmooth±0.1% (lower limit of ±0.15mm)Standard SmoothHigh-Temperature Resin show details |
| Plastic | ±0.2mm | High-Temperature Resin | This material is great for heat-resistant mounts, fixtures, and housings, due to its high heat deflection.SLADLPMSLALCD1Heat resistantHigh detailDurableVisualFunctional±0.2% (lower limit of ±0.2mm)Standard SmoothLithaBone HA 400 show details |
| Plastic | ±0.2mm | HIPS | HIPS is a material blend of polystyrene plastic and polybutadiene rubber. The mixture of these polymers results in a material that is both tough and resistant to impact.FDMInfills: 20%, 40%, 60%, 80%, 100%Impact resistant±0.3% (lower limit of ±0.2mm)StandardHigh-Detail Resin show details |
| Plastic | ±0.2mm | iglidur® I150-PF | iglidur I150-PF by igus features a high abrasion resistance at low speeds combined with good mechanical properties.FDMInfills: 20%, 40%, 60%, 80%, 100%Durable±0.2% (lower limit of ±0.2mm)Standardiglidur® I180-PF show details |
| Plastic | iglidur® I180-PF | ||
| Plastic | ±0.2mm | LithaBone HA 400 | LithaBone HA 400 contains a ceramic material based on hydroxyapatite (HA). With a relative density of 85% and a corresponding porosity of 15%, it is perfect for bioresorbable applications. The HA powder is certified ASTM standard F1185-03.LCMFunctionalBiomedicalSmooth±0.2% (lower limit of ±0.2mm)Standard SinteredLithaBone TCP 300 show details |
| Plastic | ±0.2mm | LithaBone TCP 300 | LithaBone TCP 300 contains a beta-tricalcium phosphate (ß-TCP) based ceramic which in the right setting, enables implants with defined pore geometries. The material can be resorbed by the body and replaced by new bone.LCMFunctionalSmoothBiomedicalHigh detail±0.2% (lower limit of ±0.2mm)Standard SinteredLithaCon 3Y 210 ZrO2 show details |
| Plastic | ±0.2mm | LithaCon 3Y 210 ZrO2 | LithaCon contains zirconia stabilized with 3 mol% Yttria. Some of the mechanical highlights of these materials are their excellent flexural strength (> 1000 MPa), fracture toughness, resistance to abrasion, and thermal shock resistance.LCMChemical resistantStrongBiomedicalFunctionalSmooth±0.2% (lower limit of ±0.2mm)Standard SinteredLithaLox HP 500 Al2O3 show details |
| Plastic | ±0.2mm | LithaLox HP 500 Al2O3 | Lithalox HP 500 contains a high-purity (99.99%) aluminum oxide (alumina) material and is characterized by its high density, a favorable 4-point bending strength, and exceptionally smooth surface quality.LCMHeat resistantBiomedicalSmoothFunctional±0.2% (lower limit of ±0.2mm)Standard SinteredMJF Nylon PA11 show details |
| Plastic | ±0.2mm | Markforged® H13 Tool Steel | Markforged H13 tool steel is an abrasion-resistant, hard material with a good resistance to heat.FDMInfills: 20%, 40%, 60%, 80%, 100%StrongHeat resistantFunctional±0.3% (lower limit of ±0.2mm)SinteredMarkforged® Inconel 625 show details |
| Plastic | ±0.2mm | Markforged® Inconel 625 | Markforged Inconel 625 is a nickel chromium-based superalloy that is extremely resistant to corrosion and strong at high temperatures.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantChemical resistantFunctionalDurable±0.3% (lower limit of ±0.2mm)SinteredMarkforged® Onyx show details |
| Plastic | ±0.2mm | Markforged® Onyx | Onyx is a carbon fiber reinforced nylon that is used to print strong prototypes or end-use parts.FDMInfills: 20%, 40%, 60%, 80%, 100%Chemical resistantStrongDurableFunctional±0.3% (lower limit of ±0.2mm)StandardMetal-Filled PLA show details |
| Plastic | ±0.3mm | MJF Nylon PA11 | Multijet Fusion PA11, produced by HP, is a bio-derived powder with exceptionally high toughness. This material offers high ductility and impact strength for all applications, especially functional parts.MJF10Impact resistantDurableBiomedicalFunctionalVisual±0.3% (lower limit of ±0.3mm)RawPolishedMJF Nylon PA12 show details |
| Plastic | ±0.3mm | MJF Nylon PA12 | Developed by HP, MJF Nylon is a widely used material for strong and detailed end-use parts and prototypes.MJF11StrongImpact resistantFunctionalVisual±0.3% (lower limit of ±0.3mm)RawPolishedVapor smoothedMaraging Steel show details |
| Plastic | ±0.1mm | Multicolor | A great material for striking visual models produced in different materials.MJFPolyJetVisual±0.2% (lower limit of ±0.1mm)Multicolor+HP® MJF MulticolorNylon PA12 CBF show details |
| Plastic | ±0.3mm | Nylon PA12 CBF | PA12 CBF is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous basalt fibers. This unique combination gives the finished part a smooth surface along with strength, toughness, and durability.CFCSmoothFunctionalDurableStrong±1.6% (lower limit of ±0.3mm)Standard smoothNylon PA12 CCF show details |
| Plastic | ±0.3mm | Nylon PA12 CCF | PA12 CCF is a is a co-extruded material consisting of nylon PA12 with a composite of nylon & continuous carbon fibers. This unique combination gives the finished part a smooth surface along with high strength, toughness, and durability.CFCFunctionalStrongSmoothDurable±1.6% (lower limit of ±0.3mm)Standard smoothPC-ABS show details |
| Plastic | ±0.2mm | PC-ABS | PC-ABS combines the exceptional strength and heat resistance of PC with the flexibility of ABS.FDMInfills: 20%, 40%, 60%, 80%, 100%StrongHeat resistantFunctional±0.4% (lower limit of ±0.2mm)StandardPEEK show details |
| Plastic | ±0.2mm | PEEK | PEEK is a lightweight, industrial-grade thermoplastic polymer with high-temperature and pressure resistance.FDMInfills: 20%, 40%, 60%, 80%, 100%Chemical resistantHeat resistantFunctionalStrongImpact resistant±0.3% (lower limit of ±0.2mm)StandardPETG show details |
| Plastic | ±0.4mm | PETG | PETG, widely used for durable and functional parts, combines strength, chemical resistance, and low cost.FDMInfills: 20%, 40%, 60%, 80%, 100%42Chemical resistantFunctionalStrong±0.4% (lower limit of ±0.4mm)StandardSandedESDPETG CCF show details |
| Plastic | ±0.3mm | PETG CCF | PETG CCF is a co-extruded material consisting of Clear PETG with a composite of PETG & continuous carbon fibers. This unique combination results in a part with 20 times the tensile strength of PETG with a smooth translucent finish.CFCSmoothFunctionalStrongImpact resistantDurable±1.6% (lower limit of ±0.3mm)Translucent smoothPLA show details |
| Plastic | ±0.2mm | PLA | PLA is a low-cost plastic, perfect for prototypes and functional parts that do not require strength or heat resistance.FDMInfills: 20%, 40%, 60%, 80%, 100%99Visual±0.3% (lower limit of ±0.2mm)StandardSandedPMMA show details |
| Plastic | ±0.35mm | Plated Brass | Brass plated with a precious metal coating is perfect for jewelry pieces.Lost Wax CastingHigh detailVisual±5% (lower limit of ±0.35mm)PolishedPolycarbonate show details |
| Plastic | ±0.5mm | PMMA | PMMA's strength and toughness makes it great for functional parts and high-quality prototypes, while being relatively affordable.Binder JettingFunctionalDurableHigh detailStrongVisual±0.5% (lower limit of ±0.5mm)RawPPSU/PPSF show details |
| Plastic | ±0.3mm | Polycarbonate | Polycarbonate is an industrial-grade thermoplastic with high heat resistance and high strength.FDMInfills: 20%, 40%, 60%, 80%, 100%2Impact resistantFunctionalHeat resistant±0.3% (lower limit of ±0.3mm)StandardPolypropylene show details |
| Plastic | ±0.3mm | Polypropylene | Polypropylene is a versatile and durable material, highly suitable for compliant and functional parts.SLSMJFDurableFunctional±0.3% (lower limit of ±0.3mm)RawPowder-Based TPU show details |
| Plastic | ±1.5mm | Powder-Based TPU | Powder-based TPU is a rubber-like material suitable for functional prototypes and wear-resistant parts.SLSMJF11FlexibleFunctional±1.8% (lower limit of ±1.5mm)Natural GrainyPolishedRigid Polyurethane show details |
| Plastic | ±0.3mm | PPSU/PPSF | PPSU is a heat- and chemical-resistant material suited for automotive, aerospace, and plumbing applications.FDMInfills: 20%, 40%, 60%, 80%, 100%FunctionalHeat resistantChemical resistant±0.3% (lower limit of ±0.3mm)StandardPlated Brass show details |
| Plastic | ±0.4mm | Rigid Polyurethane | Rigid Polyurethane is very stiff and strong with material properties that outperform ABS plastic and rivals Nylon. This material is perfect for mechanical parts that need to be tough, heat-resistant, and abrasion-resistant.DLSSmoothStrongFunctional±0.2% (lower limit of ±0.4mm)Standard SmoothRigid Resin show details |
| Plastic | ±0.2mm | Rigid Resin | Rigid resin is a glass-reinforced photopolymer that offers a high level of detail, stiffness, and deformation resistance.SLADLPcDLMLCDPolyJet+1High detailStrongFunctionalSmoothVisual±0.2% (lower limit of ±0.2mm)StandardSLS Nylon PA11 show details |
| Plastic | ±0.05mm | Silicone Rubber | Elastic silicone rubber (AR-G1) allows for thin walls and fine details while still providing the resistance and flexibility of silicone.InkjetFunctionalDurableFlexible±0.2% (lower limit of ±0.05mm)AR-G1L (Shore A35)AR-G1H (Shore A65)Somos® Evolve show details |
| Plastic | ±0.3mm | SLS Nylon PA11 | PA11 is a bio-based and temperature-stable material that features a high impact resistance and is commonly used to print strong and functional parts.SLS9VisualBiomedicalDurableImpact resistantFunctional±0.3% (lower limit of ±0.3mm)RawPolishedSLS Nylon PA11 Carbon Fiber show details |
| Plastic | ±0.4mm | SLS Nylon PA11-ESD | SLS PA11 ESD is a bio-derived powder material with electrostatic discharging properties for increased process safety in advanced applications.SLSFunctionalDurableImpact resistantVisual±0.4% (lower limit of ±0.4mm)StandardSLS Nylon PA12 show details |
| Plastic | ±0.3mm | SLS Nylon PA12 | Nylon PA12 (Polyamide) is a strong and heat-resistant material commonly used to print strong and functional parts.SLS39StrongHeat resistantFunctionalVisual±0.3% (lower limit of ±0.3mm)RawPolishedWaterproofDyed VelvetSatinSLS Nylon PA6 show details |
| Plastic | ±0.3mm | SLS Nylon PA6 | Nylon PA6 is a strong and heat-resistant material commonly used to print strong and functional parts.SLSFunctionalImpact resistantDurableHeat resistantVisual±0.3% (lower limit of ±0.3mm)Mineral FilledRawSilicone Rubber show details |
| Plastic | ±0.2mm | Somos® Evolve | Somos Evolve is the perfect material for strong, highly detailed functional prototypes and parts that need to withstand continuous usage.SLA4StrongHigh detailFunctionalDurableVisual±0.2% (lower limit of ±0.2mm)Standard SmoothSomos® GP Plus 14122 show details |
| Plastic | ±0.2mm | Somos® GP Plus 14122 | Somos GP Plus 14122 is ideal for functional prototypes, concept models, and low volume production parts.SLAFunctionalHigh detailVisualSmooth±0.2% (lower limit of ±0.2mm)StandardSomos® PerFORM show details |
| Plastic | ±0.2mm | Somos® PerFORM | Somos PerFORM is the material of choice for applications that require strong, stiff, temperature-resistant composite parts.SLAFunctionalHeat resistantStrongHigh detailVisual±0.2% (lower limit of ±0.2mm)Standard SmoothSomos® Taurus show details |
| Plastic | ±0.2mm | Somos® Taurus | Somos Taurus has high thermal and mechanical properties along with superior strength, high accuracy, and exceptional surface finish.SLAHigh detailDurableFunctionalVisual±0.2% (lower limit of ±0.2mm)Standard SmoothStandard Resin show details |
| Plastic | ±0.2mm | Standard Resin | Standard resin is a low-cost material, best used for visual models, figurines, and prototypes.SLADLPMSLALCDLFS38High detailVisualSmooth±0.2% (lower limit of ±0.2mm)StandardMatteGlossySterling Silver show details |
| Plastic | ±0.4mm | Sterling Silver | Sterling silver is the perfect material for jewelry and unique metal art pieces.Lost Wax CastingHigh detailVisual±5% (lower limit of ±0.4mm)Polished ShinySandblastedSatinAntiqueSurgical Guide Resin show details |
| Plastic | ±0.2mm | Surgical Guide Resin | Formlabs's surgical guide resin is a CE certified, biocompatible material that meets Class I requirements.SLABiomedicalSmoothFunctional±0.2% (lower limit of ±0.2mm)StandardTitanium show details |
| Plastic | ±0.2mm | Tough Resin | Tough resin is a perfect choice for strong, detailed functional prototypes and parts that need to withstand stress and strain.SLALCDDLPcDLMMSLA+218StrongDurableHigh detailFunctionalSmooth±0.2% (lower limit of ±0.2mm)StandardMatteGlossyTranslucent Resin show details |
| Plastic | ±0.2mm | Translucent Resin | Translucent resin is a high-detail material suitable for prototypes, figurines, and visual models that need to be semi transparent.SLADLPMSLALCDPolyJet10High detailVisualSmooth±0.2% (lower limit of ±0.2mm)StandardPearl ShimmerTransparent Resin show details |
| Plastic | ±0.2mm | Transparent Resin | Transparent resin is a high-detail material suitable for transparent prototypes, figurines, and visual models.SLAPolyJetMSLADLPLCDHigh detailVisualSmoothTransparent±0.2% (lower limit of ±0.2mm)Transparent ClearULTEM 1010 show details |
| Plastic | ±0.3mm | ULTEM 1010 | ULTEM 1010 offer the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.FDMInfills: 20%, 40%, 60%, 80%, 100%Chemical resistantFunctionalHeat resistant±0.3% (lower limit of ±0.3mm)StandardULTEM 9085 show details |
| Plastic | ±0.3mm | ULTEM 9085 | ULTEM 9085 is a high-performance thermoplastic with excellent chemical resistance and an extreme level of flame retardancy.FDMInfills: 20%, 40%, 60%, 80%, 100%Heat resistantChemical resistantFunctional±0.3% (lower limit of ±0.3mm)StandardUltrafuse 17-4 PH Steel show details |
| Plastic | ±0.2mm | VisiJet M2S-HT90 | VisiJet M2S-HT90 is a strong and rigid material for applications requiring temperature resistance and/or rigidity, ideal for rapid tooling, under the hood parts, enclosures and housingsMJPHeat resistantSmoothBiomedicalFunctionalStrong±0.2% (lower limit of ±0.2mm)Standard smoothWood-Filled PLA show details |
| Plastic | ±0.3mm | Wood-Filled PLA | Wood-filled PLA is the fusion of standard PLA and wood fiber used to create a wood-textured feel.FDMInfills: 20%, 40%, 60%, 80%, 100%1Visual±0.3% (lower limit of ±0.3mm)NaturalSandediglidur® I150-PF show details |