---

Standby & Cleaned up  Power for 3d printers  Search

---

	Energy Conservation Considerations Heat bed Hot End Part optimization Power Supply (not needed?) 3D Printer State Power Consumption Off 0 Watts Sitting idle 5-15 W Idle with motors engaged (e.g. after homing) 20-40 W Preheating after homing 250-300 W Printing 50-150 W
Power Filtering	Power Source 1.26 Kwh     Delta Max Version 2Kwh			Solar Power Array for recharging power source.
	Our printing power use calculator suggests that this unit can power a printer for ~8 to 12 hours depending on model. Charge by wall outlet, vehicle or solar panel. Capacity 1.26-2kwh of clean power.
Gas powered Generator for Recharging Power Source

Service

Drone (40Wh)	29 times	48 times	48 times	17 times	29 times	48 times
CPAP (40W)	21 hrs	34 hrs	34 hrs	13 hrs	21 hrs	34 hrs
Laptop (60Wh)	19 times	32 times	32 times	12 times	19 times	32 times
Mini Fridge (60W)	19-38 hrs	33-66 hrs	33-66 hrs	12-24 hrs	19-38 hrs	33-66 hrs
TV (110W)	8 hrs	15 hrs	15 hrs	6 hrs	8 hrs	15 hrs
Coffee Maker (1000W)	1.1 hrs	1.9 hrs	1.9 hrs	42 mins	1.1 hrs	1.9 hrs
Microwave (1300W)	54 mins	1.5 hrs	1.5 hrs	36 mins	54 mins	1.5 hrs
Air Fryer (1500W)	42 mins	1.2 hrs	1.2 hrs	36 mins	42 mins	1.2 hrs
Air conditioner (1800W)	42 mins-1.2 hrs	1-2 hour	1-2 hour	36 mins-1 hour	42 mins-1.2 hrs	1-2 hour
Space heater (2200W)	/	48 mins	48 mins	/	/	48 mins