Desktop Manufacturing  Camera Control  Offline Controllers

$50 to $70	Ruida Cloudray			Octoprint for 3D printing
Offline Controller Amazon MKS DLC Board Lightburn $50	Ruida DSP	https://orturoffice.com/products/ortur-controller-for-offline-control LM2 Pro only		Raspberry Pi

Diode laser Ruida DSP

I got it working with mine DSP controller…
I hooked up the TTL cables(+ -) to L-On and L-An accordling. Use the same pins your CO2 tube is using… I can see in the picture that it’s using L-On1 and L-An1, do the same, move the + from LWPM2 to L-On2 and from GROUND to L-An2.
Mine works fine even on pulse and the power changes accordingly to the settings. It works fine on RDWorks or Ligthburn.
I use the Laser2 offset in Lightburn and I can engrave with the diode and cut with the CO2(laser1).
You have to work out the speed as diode will be very slower. So, you will end up with speeds of max 30mm/s depending on your diode.