LASER News	Entry Level	Prosumer  Level	Advanced Methods		Materials
Sulpfun Laser Atomstack 20W Biden 3d printing initiative. Best 3d Printers by budget. Xtool Omtech Full spectrum Trotec Epilog	NEJE or ORTUR Laser Lightburn Software Jinsoku	Sculpfun Atomstack 130w LightBurn	Inkscape with Plugin Load file up into  printer.	Adding a laser to a 3d printer. Can be finicky. Best Laser Etcher Cutter for Any Budget	Lots of Free Materials High Value Materials Slate Glass Metal Projects Boxes Signs QR Codes and Barcodes Name Plates Front Planels Circuit Boards
Gotchyas Marlin and Lightburn Marlin Issues Lightburn Marlin Vs Grbl vs Smoothie Ok after installing marlin then reading up was recommended it’s not the best firmware for a laser so I installed grbl LPC and low and behold all the same hardware no more freezing and prints are actually finishing Try grbl-lpc or Cluster Mode Smoothieware (although I have heard MKS and smoothieware aren’t good bedfellows). If you mostly cut, rather than engrave photos, anything will work. Disconnections aren’t the result of firmware type, but of hardware - controller, cables, config.	Portable	Stand Alone	Advanced Dedicated Machines with Z axis Anycubic Ideal for Dedicated Jobs Runs of BMP Adapt GCODE files and use fan to run Laser for more flexibility. PETG Filament Petg Setup Most Popular PETG filament Print PETG over ABS bed Engineering Grade Materials really need a bed and an enclosure. Flashforge PETG HOW TO Clogging FF Simplify 3d Speed Fix $149 ASA PC-MAX	Best Laser System for the Dollar Atomstack Best Deal dual Function Anycubic Mega Entry level machine. Needs a heated bed to do PETG $36 plus 90-110c PETG Machine Ender 3 Voxelab
	Generally no File upload / Standalone		Tends to Be Slow
	$300	$500	Machine Cost Entry <$200 ABS upgrades Heat Bed
			Build in Enclosure and Exhaust	PID controller K Thermocouple -200 to 1260°C

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little "shine" or "spark" to it.

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

Specification: 

Temperature 

Recommended Extrusion/Nozzle Temp: 230°C - 250°C (446℉~ 482℉)

Heated Bed Temp: 80°C - 90°C (176℉~ 194℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.05

Filaments Net Weight: 6 kg (13.2 lbs) 

Recommended Printing Conditions:

Cooling Fan: Turned on

Printing Speed: 30~50(mm/s)

Raft Separation Distance: 0.14(mm)

Retraction Distance: 1~3 mm

(Note：Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)