Laser Engraving Products
Laser Site list

$100
Blanks
Slate
Wood
Aluminum
Double Color Plastic Sheet
Black Acrylic
Stainless Steel
Sprays can be detrimental to lasers.
Corrosion and deposits.
R30 Module for Metals without Coatings
Bamboo
  • Boat & Ships
  • Boat Term Plaques
  • Recipes
  • QR Code Plaques
  • Nautical Theme Plaques
  • Knots Nautical
  • Fishing Knots
  • Latitude Longitude Plaques
  • Nameplates
  • Rulers
  • Machinist Guides
$80.00

Camera Calibration

If you want to take charge of your future by starting a laser engraving business, here are some ideas to get you started:

  • Holiday Decorations and Personalized Gifts. ...

  • Wine Glasses and Other Glassware. ...

  • Wedding Favors. ...

  • Company Logos, Signage, and Other Marketing Materials. ...

  • Key Chains and Jewelry.


 You can absolutely make money with a laser engraving business. In fact, any laser engraver owner who is not making money with their laser machine is probably not trying to. The advantage of the laser engraver cutter is that it can turn low-cost items into valuable products quickly, accurately, and easily.Aug 19, 20

Drafts



When it comes to laser engraved products for Puget Sound locals, the possibilities are vast and varied! Here are some ideas to get you started:

Nature and scenery:

Local landmarks and culture:

Personalization and customization:

Beyond the usual suspects:

These are just a few ideas to spark your creativity. Remember to use high-quality materials and keep your designs clean and elegant to appeal to the sophisticated tastes of Puget Sound residents.

Bonus tip: Partner with local businesses or artists to create unique collaborations, like engravings featuring artwork inspired by the Sound or products made from locally sourced materials.

I hope this helps you come up with some laser engraved products that will resonate with the folks of Puget Sound!


How do you engrave stainless steel with an atomstack p9 laser engraver?

Engravng stainless steel with an Atomstack P9 laser engraver is possible, but it requires careful preparation and specific settings to achieve the desired results. Here's a guide to help you through the process:

Preparation:

  1. Choose the right type of stainless steel: Not all stainless steels are created equal. For laser engraving, you'll want to use a type that is specifically labeled as "laserable" or "engravable." These steels typically have a lower chromium content and are more receptive to the laser beam. Avoid using austenitic stainless steels (304 and 316) as they are highly reflective and prone to melting or warping under the laser.

  2. Opens in a new windowwww.ostlingslasercraft.com

  3. Clean the surface: Make sure the area you want to engrave is clean and free of any dirt, oil, or fingerprints. Use a lint-free cloth and isopropyl alcohol to wipe down the surface.

  4. Prepare your design: Your design should be in a black and white format, with the areas you want to engrave being black. You can use image editing software like Photoshop or GIMP to create or convert your design.

  5. Focus the laser: The Atomstack P9 has a fixed-focus laser, so you don't need to worry about manually adjusting the focal length. However, it's important to make sure the laser head is positioned at the correct distance from the surface of the stainless steel. The ideal distance is usually between 1 and 3mm.

Settings:

  1. Laser power: Start with a low laser power setting, around 50% to 70%, and gradually increase it if needed. The optimal power will depend on the thickness of the stainless steel and the desired depth of the engraving.
  2. Engraving speed: A slower engraving speed will result in a deeper and more detailed engraving, but it will also take longer. Start with a speed of around 100mm/s and adjust it as needed.
  3. Passes: You may need to run the laser over the same area multiple times to achieve the desired depth of engraving. Start with one or two passes and increase as needed.

Tips:

  • Wear safety glasses to protect your eyes from the laser beam.
  • Work in a well-ventilated area to avoid inhaling any fumes from the engraving process.
  • Test your settings on a scrap piece of stainless steel before engraving your final project.
  • Be patient and experiment with different settings to find what works best for your project.

Here are some additional resources that you may find helpful:

How do you engrave brass with an atomstack p9 laser engraver?

Here's how to engrave brass with an Atomstack P9 laser engraver:

Materials:

  • Atomstack P9 laser engraver
  • Brass sheet (the thickness should be compatible with your laser engraver)
  • Laser focusing gauge
  • Isopropyl alcohol
  • Microfiber cloth
  • Safety goggles
  • Gloves
  • Laser Engraving Spray IE Enduramark or Cermark

Preparation:

  1. Clean the brass sheet: Wipe the brass sheet with isopropyl alcohol and a microfiber cloth to remove any dirt, oil, or fingerprints. These can interfere with the engraving process and create uneven results.
    Image of brass sheetOpens in a new windowmetalsdepot.com
  2. Focus the laser: Use the laser focusing gauge to ensure the laser beam is focused to the smallest point possible on the brass sheet. This will create the sharpest and most precise engravings.
    Image of laser focusing gaugeOpens in a new windowwww.yeggi.com
  3. Design your engraving: Create your desired design using laser engraving software like LightBurn or LaserGRBL. You can import images, text, or create your own designs.

Engraving:

  1. Place the brass sheet: Secure the brass sheet to the engraving bed of the Atomstack P9. Make sure it's flat and level to avoid uneven engraving.
  2. Set the laser parameters: The optimal laser parameters for engraving brass with the Atomstack P9 will vary depending on the thickness of the brass and the desired depth of the engraving. However, a good starting point is to use a power of 60-70% and a speed of 200-300 mm/min.
    Image of Atomstack P9 laser engraverOpens in a new windowwww.amazon.com
  3. Start engraving: Send the engraving job to the Atomstack P9 and let it do its work. Wear safety goggles during the engraving process to protect your eyes from the laser beam.
  4. Adjust parameters if needed: If the engraving is not deep enough, you can increase the power or decrease the speed. Conversely, if the engraving is too deep, you can decrease the power or increase the speed.

Tips:

  • For deeper engravings, you can perform multiple passes over the same area.
  • To create a black and white effect, you can apply a coat of laser marking spray to the brass before engraving. The laser will remove the spray in the engraved areas, revealing the bare brass underneath.
  • Be careful not to over-engrave the brass, as this can cause it to melt or distort.

Here are some additional resources that you may find helpful:

I hope this helps! Let me know if you have any other questions.

I hope this helps! Let me know if you have any other questions.

How does one create 3d look images for laser engraving?

There are a few different ways to create 3D-look images for laser engraving, each with its own advantages and disadvantages. Here are three common methods:

1. Using grayscale images:

  • This is the simplest method, but it can also be the least effective. To create a 3D effect, you simply use a grayscale image where the lighter areas will be engraved shallower, and the darker areas will be engraved deeper.

    Image of Grayscale image for laser engravingOpens in a new windowforum.lightburnsoftware.com

  • The advantage of this method is that it is easy to do and doesn't require any special software. However, the results can be fairly subtle, and it can be difficult to control the amount of depth you get.

2. Using dithering:

  • Dithering is a technique that uses small dots of varying sizes to create the illusion of shading and depth. You can use a dithering pattern to convert a grayscale image into a series of dots that can be engraved by a laser.

    Image of Dithering pattern for laser engravingOpens in a new windowawesome.tech

  • The advantage of this method is that it can create more dramatic 3D effects than using grayscale alone. However, it can also be more time-consuming to set up, and the results can be more susceptible to errors.

3. Using 3D modeling software:

  • The most advanced method for creating 3D-look images for laser engraving is to use 3D modeling software. This allows you to create true 3D models that can be engraved with varying depths and textures.

    Image of 3D modeling software for laser engravingOpens in a new windowhobarts.com

  • The advantage of this method is that it gives you the most control over the final result. However, it also requires the most skill and time to set up.

Additional tips:

  • No matter which method you use, it is important to start with a high-quality image. The higher the resolution, the better the results will be.
  • You can also experiment with different laser settings to achieve different effects. For example, you can use a higher power setting to create deeper engravings, or a lower power setting to create more subtle shading.
  • Be sure to test your engravings on scrap material before you work on your final project.

I hope this helps! Let me know if you have any other questions.