Here are two potential designs for a fixture to port an air exhaust system through a sliding screen door slot track:
1. Clip-on Adapter:
This design would utilize a two-part system: a base plate that attaches to the top track of the sliding screen door and a removable adapter that connects to the base plate and houses the air exhaust hose.
Base plate:
The base plate would be made from a sturdy material like aluminum or weatherproof plastic.
It would have two L-shaped brackets that clip onto the top track of the sliding screen door, similar to how some curtain rods attach.
The base plate could have adjustable screws or clamps to ensure a snug fit on different track widths.
sliding screen door track clip on adapter
Adapter:
The adapter would be a box-shaped unit with an opening on one side for the air exhaust hose to connect to.
It would have a corresponding slot or groove on the opposite side that slides onto the base plate, allowing for easy removal and attachment.
The adapter could be made from the same material as the base plate or a lightweight plastic for easier handling.
To prevent air leaks, a rubber gasket or seal could be used around the hose connection point.
2. Sliding Track Channel:
This design would involve replacing a portion of the existing sliding screen door track with a custom channel that incorporates the air exhaust hose port.
Custom track:
The custom track would be made from a similar material as the original track, like aluminum or reinforced PVC.
It would have a wider profile than the standard track to accommodate the air exhaust hose, potentially with a smaller channel within the main channel for the hose to run through.
The custom track could be designed to seamlessly connect with the existing tracks on either side, ensuring smooth sliding operation for the screen door.
sliding screen door track channel
Hose port:
The hose port would be integrated into the custom track at a convenient location, potentially near the center or towards the edge depending on your preference.
It could be a simple circular opening with a rubber grommet to secure the hose, or a more elaborate latching mechanism for a more secure connection.
Additional considerations:
Both designs should be weatherproof and durable to withstand outdoor elements.
The size and shape of the hose port should be compatible with your specific air exhaust system.
Ease of installation and removal is important for both options, but especially for the clip-on adapter if you need to frequently move the hose.
You may also want to consider the aesthetic impact of the fixture and choose a design that blends in well with your existing door and surroundings.
Ultimately, the best design for your needs will depend on your specific requirements and preferences. I hope these suggestions provide a good starting point for your project!
