ofLaser Master & Laser Master1 & Laser Master 2 - With LU20W
LU20W
Materials
Engrave
or Cut
Recomended
Power Range
S0-S1,000
Recomended
Engraving Speed
mm/Min
Remark
1.6MM Plywood
Engrave S800 3,000mm/min It need to be adjusted based on different woods,
Cut S1,000 different colors. 200mm/min
Run 1 round
3MM Plywood
Engrave S800 3,000mm/min It need to be adjusted based on different woods,
Cut S1,000 different colors. 100mm/min
Run 2 rounds
Paperboard
(Cardboard Box)
Engrave S200 3,000mm/min It need to be adjusted based on different thickness
Cut S1,000 paperboards, different colors. 1,000mm/min
Run 3 rounds
250g Kraft Paper
Engrave S200 3,000mm/min
It need to be adjusted based on different colors. Cut S1,000 1,000mm/min
Run 1 round
5MM KT Board
(Dark color) Cut S1,000 2,000mm/min
Run 1 round
It need to be adjusted based on different colors.
There will be black edges after cutting
Non-woven fabrics
(0.1~0.5mm, Dark color) Cut S1,000 1,600mm/min
Run 1 round
It need to be adjusted based on different colors.
There will be black edges after cutting
Cotton Cloth
(Dark color) Cut S1,000 1,200mm/min
Run 1 round
Some cotton blended fabrics may be melt.
It need to be adjusted based on different colors.
There will be black edges after cutting
0.7MM Leather
Engrave S400 3,000mm/min It need to be adjusted based on different leathers,
Cut S1,000 different colors. 500mm/min
Run 1 round
Some Plastic Sheet
(Dark Color) Engrave S800 3,000mm/min
Some plastic sheets may be melt.
It need to be adjusted based on different
colors,different colors. Solid wood Engrave S800 3,000mm/min It need to be adjusted based on different woods,
different colors. Acrylic Engrave S800 3,000mm/min Cannot engrave transparent Acrylic directly,
need to paste Kraft paper film on the surface. Powder Coated Metal
Paint Sprayed Metal Engrave S1,000 3,000mm/min
Engraved on powder coating.
It need to be adjusted based on different finishings
and colors. Plated Metal Engrave S1,000 3,000mm/min
It's the surface color turned to be other color.
Need to use Marker to balck the finishing first.
It need to be adjusted based on different finishings
and colors. Anodised Aluminium Engrave S1,000 3,000mm/min
It's the surface color turned to be other color.
It need to be adjusted based on different finishings
and colors. Cobblestone Engrave S1,000 100mm/min The surface should be coated with acrylic dye heat
transfer film. Stainless Steel Engrave S1,000 100mm/min The surface should be painted black by Marker Pe
What Materials Can ORTUR Laser Master 2 Cut?
Ortur provides a breakdown of what it can laser engrave and cut.
