Glue stick to protect bed
Use three sheets of paper for PETG.
70 and 80 °C, but you can go as high as 100 °C. Start with 70 °C
230-250 max
1.75mm
Export from sketchup in mm
.4mm nozzle on Anycubic
Settings Cura
Anycubic Site
Anycubic Vyper Settings
CCE3D PETG filaments are made of premium PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy-type finish.
Retraction: Set the retraction speed to around 25 mm/s for both Bowden and direct drive extruders. Retraction distance should be set at about 6 or 7 millimeters for Bowden extruders, and 3 or 4 millimeters for direct drive extruders. With PETG, retraction speed is more important than distance. If you still have oozing and stringing, try lowering the retraction speed.
Retraction speed:25mm/s
Retraction: 3-4mm direct drive
GLOSSY BLACK PETG FILAMENT 1.75MM +/- 0.05 MM, 1KG SPOOL (2.2LBS)
MATERIAL: PETG
DIAMETER: 1.75 +/-0.05MM
COLOR: GLOSSY BLACK
NET WEIGHT: 1KG
LENGTH: 330 +/-5M
PRINT TEMP: 230- 250°C
RECOMMENDED PRINTING TEMP: 240°C
Bed Temperature Required? - Minimum 65°C
Info on PETGKNURLING RADIAL DUPLICATING
Knurling Knob
GCODE Viewer estimator
GCode Analyser
icsl